Vortex Flow Meter

Welcome to purchase discount source vortex flow meter from our company, which is one of the best China vortex flow meter manufacturers and suppliers.Vortex Flow MeterMultivariable Type: option code /MV1) Resistance temperature sensor built into vortex shedder bar2) User selectable Flow, Temp, Total and other displays3) Mass flowrate calculated using temperature readings and steam table data4) Able on its own to output mass flowrateSaturated Steam Measurement Mechanismprovides data on the temperature, pressure and density of steam and is provided by a certification bodysuch as the ASME. The saturated steam curve shows the steam saturation point for eachpressure/temperature level. The digitalYEWFLO converter calculates the mass flowrate using the density figure from the steam table. With its Spectral Signal Processing system, the digitalYEWFLO is able to accurately measure fluctuations in temperature.- With superheated steam, density is calculated as a fixed pressure value that includes the superheated temperature value.With the totalization function, energy consumption data collected over a period of time can be stored in memory and used to devise measures for reducing energy consumption.SpecificationStandard TypeReduced Bore TypeMulti-Variable Type                               ModelModel DY   Vortex Flow meter   (Integral Type,   Remote Type)   Model DYA   Vortex Flow Converter   (Remote Type)   (Option for High   Process Temperature   Version: /HT,   Option for Cryogenic Version: /LT)Option: /R1, /R2   1 size down: /R1   2 size down: /R2   (Option for High   Process Temperature   Version: /HT)Option: /MVFluid to be MeasuredLiquid, Gas, Steam (Avoid Multiphase Flow and Sticky   Fluids)Nominal SizeWafer15 to 100 mmN/A25 to 100 mmFlange15 to 400 mmR1: 25 to 200 mm   (Detector: 15 to 150 mm)   R2: 40 to 200 mm   (Detector: 15 to 100 mm)25 to 200 mm   (Special: 250 to 300 mm)AccuracyLiquid±0.75% of Reading   (Depends on Reynolds number)±1.0% of Reading   (Depends on Reynolds number)±0.75% of Reading   (Depends on Reynolds number)Gas   Steam±1.0% of Reading   (Depends on flow velocity)Output SignalDual Output (Both analog and pulse output available)   Communication: HART 5/HART 7, BRAIN, FOUNDATION™ fieldbusProcess Temperature-29 to 250 deg C   -29 to 450 deg C (/HT)   -196 to 100 deg C (/LT)-29 to 250 deg C   -29 to 450 deg C (/HT)-29 to 250 deg C   -29 to 400 deg C (/HT)Process Pressure-0.1MPa (-1kg/cm2)   to flange ratingAmbient Temperature-29 to 85 deg C (Depends on model type)Ambient Humidity5 to 100% RH (No Condensation)MountingFlange or Wafer Type   JIS 10/20/40K   ANSI 150/300/600/900   (Special: 1500)   DIN PN 10/16/25/40/   60/100/160Flange Type only   JIS 10/20K   ANSI 150/300Flange or Wafer Type   JIS 10/20/40K   ANSI 150/300/600/   900   DIN PN 10/16/25/40Electrical ConnectionJIS G1/2 Female, ANSI 1/2NPT Female, ISO M20×1.5 FemaleExplosion Protected TypeTIIS Ex d, FM Ex d/Ex ia, ATEX Ex d/Ex ia,   CSA Ex d/Ex ia, IECEx Ex d, SAA Ex iaMaterialBody: Stainless steel(Special: Hastelloy, Carbon steel)   Shedder Bar: Duplex stainless steel(Option: Stainless steel, Hastelloy)   Gasket: Stainless steel with Teflon coating (/HT: with Silver plating)   Converter housing, case and cover: Aluminum alloy(Option: Stainless steel)Application Note:1) Accurate Steam Measurement: from Start up to Full Operation;2) Steam Injection for Oil Recovery;3) Vortex Flowmeter in Water/Steam Injection;